Sharks caught in the KwaZulu-Natal bather protection programme,South Africa. 14. The smooth hammerhead shark Sphyrna zygaena (Linnaeus)     

ML Dicken  H Winker  MJ Smale  G Cliff 《African Journal of Marine Science》2018,40(2):157-174

The current study provides long-term catch-rate, biological and feeding data for smooth hammerhead sharks, Sphyrna zygaena, caught in South Africa’s KwaZulu-Natal bather protection programme. In total, 2 512 S. zygaena were caught in net installations between 1978 and 2014, and 72 S. zygaena were caught on drumlines between 2007 and 2014. There was no significant log-linear year trend in the net catch rate over time (slope = 0.0054, t = 1.808, p = 0.07). However, there was a significant temporal increase in mean size of the captured sharks (slope = 0.0012, t = 3.502, p < 0.001). A quasi-Poisson generalised additive mixed model showed that increasing latitude, winter months, colder sea temperatures and the deployment of drumlines all had a significant positive effect on the catch rate of sharks in nets. The size frequency of the catch was unimodal, with significantly more females caught in the nets and more males on the drumlines. The majority (93.1%) of all sharks caught were immature and measured between 80 and 120 cm precaudal length. Teleosts and cephalopods dominated the sharks’ diet in terms of all dietary indices. The prey species consumed indicate that immature S. zygaena are feeding primarily within the pelagic zone of shallow coastal habitats.  相似文献   

不同排列方式和间隙比下双圆柱流致振动特性研究   总被引：1，自引：0，他引：1  

刘巨保  杨明  岳欠杯  丁宇奇  姚利明 《海洋工程》2018,36(4):105-113

采用基于ALE的流固耦合分析方法,将圆柱体振动模型简化为平面双自由度质量-弹簧-阻尼系统,进行了计算参数无关性分析。对不同θ角和间隙比T下的双圆柱流致振动进行数值模拟,并与单圆柱振动计算结果进行比较,得到了不同θ角和间隙比T下中心圆柱的升阻力系数、流场分布和运动轨迹变化情况。通过分析发现小间隙比下由于两圆柱间的相互干扰,改变了中心圆柱的尾涡结构,导致了升力和阻力系数随不同θ角而发生变化;小间隙比下由于两圆柱间的相互干扰影响,均使中心圆柱的轨迹在不同θ角下发生了较大的变化,顺流向的振动频率与单圆柱振动时相比出现了多倍频,导致其运动轨迹发生了变化。  相似文献   

Equivalent continuum strain calculations based on 3D particle kinematic measurements of sand          下载免费PDF全文

Siavash Amirrahmat  Khalid A. Alshibli  Maha F. Jarrar  Boning Zhang  Richard A. Regueiro 《国际地质力学数值与分析法杂志》2018,42(8):999-1015

Constitutive modeling of granular materials has been a subject of extensive research for many years. While the calculation of the Cauchy stress tensor using the discrete element method has been well established in the literature, the formulation and interpretation of the strain tensor are not as well documented. According to Bagi, 1 researchers mostly adopt well‐known continuum or discrete microstructural approaches to calculate strains within granular materials. However, neither of the 2 approaches can fully capture the behavior of granular materials. They are considered complementary to each other where each has its own strengths and limitations in solving granular‐mechanics problems. Zhang and Regueiro 2 proposed an equivalent continuum approach to calculating finite strain measures at the local level in granular materials subjected to large deformations. They used three‐dimensional discrete element method results to compare the proposed strains measures. This paper presents an experimental application of the Zhang and Regueiro 2 approach using three‐dimensional synchrotron microcomputed tomography images of a sheared Ottawa sand specimen. Invariant Eulerian finite strain measures were calculated for representative element volumes within the specimen. The spatial maps of Eulerian octahedral shear and volumetric strain were used to identify zones of intense shearing within the specimen and compared well with maps of incremental particle translation and rotation for the same specimen. The local Eulerian volumetric strain was compared to the global volumetric strains, which also can be considered as an averaging of all local Eulerian volumetric strains.  相似文献   

Hypo‐elastic and hyper‐elastic equations of soils          下载免费PDF全文

Koichi Hashiguchi 《国际地质力学数值与分析法杂志》2018,42(13):1554-1564

  相似文献   

轴压作用下双金属复合管组合作用与承载力分析     

朱振兴  杨璐  王法承  方成 《海洋工程》2019,37(4):98-106

为探究轴压作用下双金属复合海底管道的组合作用与承载性能,对双金属复合海底管道进行了试验研究和理论分析。开展了不锈钢衬管材料性能试验,对比了国际主流不锈钢本构关系模型和试验结果。利用ABAQUS建立了精细化的双金属复合管道轴压试验有限元模型,系统研究了关键参数如复合工艺产生的环向复合应力、钢管初始缺陷幅值等对双金属复合管在轴压作用下力学性能的影响规律。通过对比已有轴压双金属复合管道试验结果,验证有限元模型。基于验证的有限元模型,对轴压作用下双金属复合管道的组合作用以及径厚比和材料强度对承载力的影响进行了分析。结果表明双金属复合管道的轴压极限承载力主要取决于基管的截面屈服荷载,并随着管径和材料强度的提高而增大。并依据分析结果对双金属复合海底管道的设计提出建议。  相似文献   

基于深度置信网络的GNSS-IR土壤湿度反演     

陈堃  沈飞  曹新运  朱逸凡 《测绘通报》2020,(9):100-105

基于大地测量型GNSS接收机获取的反射信号反演土壤湿度是GNSS领域的研究热点。为克服常规线性回归和BP神经网络算法等的缺陷，本文提出了一种基于深度置信网络的GNSS-IR土壤湿度反演方法。试验结果表明，基于该方法得到的决定系数、土壤湿度平均绝对误差和均方根误差分别为0.909 8、0.017、0.021，与线性回归和BP神经网络算法相比，与实测数据吻合度更高，可有效提高土壤湿度反演精度，证明了方法的有效性和可靠性。  相似文献   

基于多元统计分析的渔山列岛潮间带软体动物功能群和次级生产力比较   总被引：1，自引：0，他引：1  

徐鹏  刘好真  刘懂  焦海峰  王一农  尤仲杰 《海洋与湖沼》2018,49(1):151-159

渔山列岛于2008年成为国家级海洋生态保护区,为了解渔山列岛保护区内潮间带软体动物次级生产力的时空变化。于1982年和2010年的3个季节(春、夏、冬)在渔山列岛进行潮间带软体动物调查,采用多元统计分析软体动物时空差异,以Brey经验公式计算分析软体动物次级生产力(P值,P/B值)。结果表明,年际间物种食性结构发生了明显的改变,1982年潮间带软体动物对次级生产力贡献率最大的物种有单齿螺(Monodonta labio)、锈凹螺(Chlorostoma rustica),占软体动物总次级生产力的42.88%,2010年潮间带软体动物对次级生产力贡献率最大的物种有覆瓦小蛇螺(Serpulorbis imbricata)、条纹隔贻贝(Septifer virgatus),占软体动物总次级生产力的75.96%。1982年,年均栖息密度为2758ind/m2,年均生物量为2100.26g/m2,年均次级生产力为240.04g/(m2·a),年均P/B值为0.63a–1;2010年,年均栖息密度为699ind/m2,年均生物量为1101.85g/m2,年均次级生产力为94.82g/(m2·a),年均P/B值为0.55a–1。多因素方差分析表明软体动物次级生产力年际间差异显著(F=5.761,P0.05),季节间和潮位间差异都不显著(F=0.135,P0.05;F=2.076,P0.05),P/B的值较低,表明该海域软体动物世代更替速度较慢,2010年的P/B值(0.55a–1)低于1982年的P/B值(0.63a–1),表明近30年来群落结构受到影响。  相似文献   

黄土河谷场地地形放大效应的研究     

王良  卢育霞  马林伟  孔德政 《大地测量与地球动力学》2018,38(2):167-171

使用黄土河谷场地模型对地震动峰值加速度和频谱特征进行研究。结果表明，不同工况下各观测点PGA的放大比呈现出不同的变化规律。分析山顶和山谷各点的傅里叶谱以及谱比发现，在地形和土层共同作用下的放大效应是各自单独作用下放大效应的乘积。  相似文献   

Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用     

刘金海  涂锐  张睿  张鹏飞  卢晓春 《大地测量与地球动力学》2018,38(6):568-570

因GNSS系统间观测噪声、轨道精度的差异，采用经验权比进行组合定位难以得到最优结果。基于此，在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计，对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明，采用该方法确定的伪距观测值最佳权比为5∶1∶1，相位观测值最佳权比为1∶1∶1，有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。  相似文献   

青岛台体应变短周期气压系数变化原因探讨     

岳龙  徐清风  臧艺博  李志强  刘云  李炜  孙忠礼 《大地测量与地球动力学》2020,40(7):765-770

青岛台体应变短周期(小于128 min)气压系数2018-01出现阶变，通过对观测系统、台站周边施工情况、监测环境等逐项现场核实，排除观测系统、周边施工的影响。利用离散小波变换和回归分析发现，钻孔水位的气压系数与体应变气压系数同步阶变，结合台站钻孔施工当天体应变钻孔水位变化、体应变趋势变化、其他相邻台站水位气压系数变化等数据认为，台站钻孔施工是导致体应变气压系数变化的原因，并定性分析其变化机理。  相似文献